Upgrade Memory in NetGear ReadyNAS NV+

With a few exceptions that I would put in the suggestion box, I really do love the NetGear ReadyNAS NV+ product line.

One of those exceptions is that I feel that the standard units that ship with only 256MB RAM are light on memory.

It turns out that they are easily upgradeable to 1GB with an inexpensive memory upgrade from Crucial.com

For your viewing enjoyment I have a short video showing the upgrade process for the ReadyNAS NV+ 1GB memory upgrade.

Upgrade Memory in NetGear ReadyNAS NV+


And as promised, it isn’t a direct link unfortunately, but you can buy the memory by clicking on the link below and doing the search for part #CT12864X40B, description is “CT12864X40B 1GB, 200-pin SODIMM, DDR PC3200 memory module”. At this writing it goes for about $75.

Crucial Product Search

{ 7 comments… read them below or add one }

Petesky July 11, 2009 at 1:02 am

Hi ! Just wartched your mem upgrade (which is very nice done). Do you know what’s the maximum memory that NV+ supports ?

Ray August 1, 2009 at 8:09 am

Thanks for the video. Did upgrading the RAM make a big difference in the REady NAS NV+? If so how so?

Thanks

admin August 1, 2009 at 10:25 am

It did seem to help a little. Considering the small cost I was happy.

I don’t know what the maximum is but 1GB is affordable – doubt if more would help much.

Simon September 10, 2009 at 3:23 am

I will give it a go on my NV+. Purchased via your affiliate link so hopefully you get commission. Cheers and thanks for all the help you provide.

dan w October 1, 2009 at 6:36 am

hi, thanks for documenting this! i found the memory part number on ebay 10/1/09 for 49 plus shipping. going to add a couple of disks, and upgrade the memory.

i have two of these nas… one for at home, one for at work, and they sync so i have automatic offsite storage of important files.

thanks for the info

tom October 28, 2009 at 2:58 am

http://www.crucial.com/store/partspecs.aspx?IMODULE=CT12864X40B
DDR PC3200 • CL=3 • Unbuffered • NON-ECC • DDR400 • 2.5V • 128Meg x 64

http://www.readynas.com/forum/faq.php#Where_can_I_find_the_ReadyNAS_memory_specification
says :
*ReadyNAS does not support CL=3.0.
*ReadyNAS does not support 1G-bits chip, that means 8-chip 1GB DIMM will not be supported

CT12864X40B is a CL3 eight chip SODIMM. Are you sure this works ?

admin October 28, 2009 at 8:19 am

That’s what shows on my invoice.

However, they have another part number: Crucial CT12864X335 (16-Chip 1GB) (Micron’s MT16VDDF12864H)

that shows up on the NetGear hardware compatibility list:
http://www.readynas.com/?page_id=83

It’s about the same price, maybe a little less.

thanks for using this link:
http://www.FreeComputerConsultant.com/go/crucial/

Roger.

Leave a Comment

Previous post:

Next post: